Epson LightScene EV-110 User Manual page 50

Setting
Security
Passphrase
Options
Open
WPA2-PSK
WPA3-PSK
WPA2/WPA3-PSK
WPA3-EAP
WPA2/WPA3-EAP
Various passphrases from 8 to
63 characters
50
Description
Selects the type of security used
on the wireless network
WPA2-PSK: uses WPA2 security
with AES for encryption in Quick
connection mode. Use the
Passphrase value to establish a
connection from a computer
WPA3-PSK: uses WPA3 security
with AES for encryption. Use the
Passphrase value to establish a
connection from a computer
WPA2/WPA3-PSK: uses
WPA2/WPA3 personal mode;
encryption is dependent on the
access point settings;
Passphrase must be the same
as the access point
WPA3-EAP: uses WPA3
enterprise mode; encryption is
dependent on the access point
settings
WPA2/WPA3-EAP: uses
WPA2/WPA3 enterprise mode;
encryption is dependent on the
access point settings
Selects the pre-shared key used
on the network; passphrases are
case-sensitive. If the network
settings are reset after the
passphrase has been changed
more than once, the first
passphrase is restored. This
setting is only displayed when
Security is set to WPA2-PSK,
WPA3-PSK, or WPA2/WPA3-
PSK.