Epson LightScene EV-110 User Manual page 168

On/Standby Status light
light
Varies Flashing blue
Off Flashing blue
Off Flashing blue
Off Flashing blue
Off Flashing blue
Laser light Temp light
Flashing Varies
orange
Flashing Off
orange
Off Flashing
orange
Off Orange
Orange Off
168
Status and solution
Refresh Mode is on. Press any button
to turn Refresh Mode off.
Internal projector error. Turn the
projector off, unplug it, and contact
Epson for help.
A fan or sensor has a problem. Turn
the projector off, unplug it, and
contact Epson for help.
Projector has overheated and turned
off. Leave it turned off to cool down.
After about five minutes, do the
following:
• Make sure that the vents are not
clogged with dust or obstructed by
nearby objects.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug the
projector and contact Epson for
help.
Laser has a problem.
• Make sure that the vents are not
clogged with dust or obstructed by
nearby objects.
• If the problem persists, unplug the
projector and contact Epson for
help.