Operating Your Vcr (Dvd) With The Remote Control - Samsung HTAS601 Instruction Manual

Operating your VCR (DVD) with the Remote Control

47
Press MODE button to make VCR indicator
1
on the remote control flash.
2
Point the remote control toward the VCR
(DVD).
3
Press POWER(
VCR (DVD).
While holding down POWER(
4
enter the code corresponding to your brand
of VCR (DVD).
If VCR (DVD) is turned on or off when you
5
press the power button of the remote
controller, the setting is completed.
The remote control may not work on some brands of VCR (DVD)s.
•
Also, some operations may not be possible depending on your brand of VCR (DVD).
The remote control will work with Samsung VCRs (DVDs) by default.
•
If you want to operate your DVD player, press the Device Select
•
button until the DVD indicator on the remote control flashes.
If the code matches the VCR (DVD)'s code, the VCR (DVD) will
•
be turned off.
If there is more than one code listed for your VCR (DVD) in the
•
table, enter one at a time to determine which code works.
You can use VCR (DVD) POWER, VOLUME, PLAY, PAUSE,
•
STOP, SKIP and Numeric button (0~9).
) button to turn on the
) button,