Table of Contents
Advertisement
SAT
(Settop Box)
VCR
• If using VCR, connect Analog Audio Out to VCR/SAT Audio
In on this unit. If using STB, connect Digital Out to the SAT
Optical connector on this unit.
• The Analog Audio and Video In jacks of the main unit are
used for SAT and VCR. You cannot connect both devices
at the same time.
• If there is a Digital Out for the satellite/cable STB, it can be
connected to the SAT Optical connector on the rear panel
to provide multi-channel surround. If there is no Digital Out
connector on the STB, connect the Analog Audio Out
connector to the VCR/SAT Audio In on the unit.
• If the external component has only one Audio Output jack,
connect it to either the right or left Audio Input jack of the
main unit.
• Connect the audio cable's red plug to the red jack and white
cable to the white jack.
TV
14
Advertisement
Table of Contents
