Table of Contents
Advertisement
Dolby Digital - EX
Movie sound track encoded with Dolby Digital EX can play back the
rear center channel added during program mixing. Rear center
channel provides fine image, in-depth and realistic feeling.
You cannot use Dolby Digital-EX in the system without rear
•
center speaker.
You need to set it to EX/ES Mode when playing back disk
•
encoded to Dolby Digital-EX in 6.1 channel.
Some disks encoded with Dolby Digital-EX do not contain
•
identification signal. In this case, set EX/ES to ON.
MAIN UNIT
Method 1
1
Press and hold SURROUND button for about 5 seconds.
"SETUP MODE" appears on the display and enters into Setup Mode.
•
2
Press SURROUND button.
Each time you press this button, EX/ES : AUTO
•
OFF will be selected in turn.
Method 1
1
Press SETUP button.
"SETUP MODE" appears on the display and enters into Setup Mode.
•
2
Press INPUT button 11 times.
"EX/ES SETUP" appears on the display.
•
3
Press SURROUND button.
Each time you press this button, EX/ES : AUTO
•
OFF will be selected in turn.
To Exit Setup Mode
Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. 'SETUP
•
MODE OFF' appears on the display and exits Setup Mode.
DTS-ES (Discrete 6.1, Matrix 6.1)
Rear center channel is added to DTS 5.1 channel, improving the
sense of direction and space for sound. Since DTS-ES decoder
is built-in in the main unit, you can play back the disk encoded
with DTS-ES Discrete and DTS-ES Matrix. DTS-ES Discrete 6.1
can record the sound of all channels including rear center
channel digitally and play back the recorded sound as they are.
You cannot use DTS-ES in the system without rear
•
center speaker.
EX/ES : ON
EX/ES :
EX/ES : ON
EX/ES :
38
Advertisement
Table of Contents
