Download Print this page
Sealey VS710 Instructions

Sealey VS710 Instructions

Cvj removal tool

Advertisement

Quick Links

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these
instructions and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE
AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
 WARNING! Ensure all Health and Safety, local authority, and general workshop practice
regulations are strictly adhered to when using this tool.
 DO NOT use this tool if damaged or worn.
 Maintain this tool in good and clean condition for best and safest performance.
 Ensure vehicle is adequately supported with axle stands, ramps, etc. as appropriate.
 Wear suitable clothing to avoid snagging. Do not wear jewellery. Tie back long hair.
 Wear approved eye protection. A full range of personal safety equipment is
available from your Sealey dealer.
IMPORTANT: Always refer to the vehicle manufacturer's service instructions, or proprietary
manual, to establish the correct procedure and data. These instructions for use are provided as a
guide only.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
INSTRUCTIONS FOR:
CVJ REMOVAL TOOL
VS710
MODEL NO:
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
email
VS710
Issue No.1
30/10/09

Advertisement

loading

Summary of Contents for Sealey VS710

  • Page 1 VS710 MODEL NO: Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
  • Page 2 2.4.1 Where the joint is retained by a circlip it will be necessary to compress the clip using a suitable tool. Keep the circlip under tension whilst winding the hub nut until the joint is released. Disassemble the tool from the drive shaft and remove the joint. VS710 Issue No.1 30/10/09 Original Language Version...