Table of Contents
Advertisement
Using the DMS through the Web (Continued)
34
E-
3
Click [] to select operation mode limit.
Users can select 'None' , 'Cool only' or 'Heat only' .
4
Set the control mode.
If you set the control mode, indoor unit operating in
limited operation mode will be automatically set to
operate in pre-set control mode. You can set the different
control mode to each of the indoor units.
- Cool only indoor unit : Users can select between fan and
- Heat only indoor unit : Users can select between fan and
(Ex: When the cool only indoor unit with the control mode
set to fan mode is changed to heat mode, DMS will
perceive it and control the indoor unit in fan mode.)
cool mode.
heat mode.
Advertisement
Table of Contents
