Table of Contents
Advertisement
Using the DMS through the Web (Continued)
3
Enable Remote Control/Disable Remote Control.
When pressing the
remote control in each room and can control the ERV only on the DMS webpage
screen.
When ending the DMS after selecting the
screen, cannot use the ERV in each room. In order to control the ERV in each room, a
user must press the
When pressing the
room. (Default:
4
Select All/Clear all.
The simultaneous control of whole installed ERV's is possible.
If you want to control all the ERV units, press the
control screen. If indoor unit is connected and is selected with ERV, only the power
ON/OFF and the
unit.
The indoor unit will run in the mode selected when last used.
In order to select the ERV only if the ERV is installed by mixing with the indoor unit,
select the ERV you want by the mouse while pressing the keyboard Ctrl key.
To deselect all, press the
18
E-
button, cannot control the ERV by the wired
on the DMS webpage screen.
button, can use the wired remote control in each
)
/
control are possible for the indoor
button.
on the DMS webpage
button on the ERV
Advertisement
Table of Contents
