Table of Contents
Advertisement
2
Select and click on the indoor unit and the background color
of the indoor unit is changed to green. The operation status
of the selected indoor unit is displayed on the upper part.
Displayed items are as follow:
Selected indoor unit address
Error
Power
Celsius(°C)
Fahrenheit(°F)
Temperature Control
Mode Set
Fan Speed
Air Swing
Displays the name of the selected indoor unit.
Displays whether there is an error on the selected
indoor unit. (Only when an error is occurred, it is displayed
as red. During the normal operation, it is not displayed on
the screen.)
Click on this button to turn on and turn off the selected
indoor unit.
The current temperature of the selected indoor unit
can be monitored and the desired temperature can
be set by clicking the
desired temperature.
Temperature unit of the DMS will be set on either
Celsius or Fahrenheit depending on the temperature
unit used by the indoor unit.
The current mode of the selected indoor unit is
displayed in light blue. Click on the desired mode to
change modes.
When controlling the operation mode, indoor unit
will be controlled in the last controlled value of the
operation mode.
(Ex: If you have recently controlled the indoor unit in
heat mode, at 20°C(60°F) with low fan speed and
air swing on, it will be controlled in the same value
when you control it in heat mode again.)
The current fan speed of the selected indoor unit is
displayed in light blue. Click on the desired fan speed to
control the fan speed.
The current air swing of the selected indoor unit is
displayed in light blue. Both air swings can be selected at
once. Click on the desired air swing to control the airflow.
and
buttons next to the
13
E-
Advertisement
Table of Contents
