Login
Function Details
Login allows only authorized users to access the web page.
There is no limit on the number of users that can access the DMS
at the same time, however, less than 5 users are recommended for
access speed reasons.
Login
1
Type in an ID and a password and click on the LOGIN
button.
2
If an ID and a password are valid, the monitoring and
control page will be displayed.
3
If the ID and the password are not matched, the LOGIN page
is displayed again.
4
If the CANCEL button is pressed after typing in the ID and the
password, the ID and password fields are cleared.
5
The default DMS user setting as follow:
ID : admin
PASS: 1234
Change the ID and the password for security reasons.
Refer to 3.2.11 for user management.
Menu Organization
If Login is successful, the following menu appears.
Click on the menu to move to the corresponding page.
1
2
3
4
5
6
7
8
9
10
11
M onitoring and Control
V iewing the Error History
S et, Run and View schedule
S etting the Power Distribution function
E nvironment Setup for Power Distribution
V iewing the Power Distribution Data
S etting the indoor unit restriction
S etting the Viewing the System Environment
L og
T racking
U ser Management
11
admin
11
E-