Led Status - GE AF-600 FP BACnet Operating Instructions Manual

7.2 LED Status

Check the LEDs. The two bi-colour LEDs on the BACnet card indicate the status of BACnet communication.
LED 1: Net Status
Phases Status
Power On. Hardware Not OK
Self test
Running Module OK
Recoverable fault
Data exchange Device communicating.
LED 2 : Module Status
Phases Status
Power On. Unrecoverable fault Drive is not responding on in-
ternal bus
Self test configuration takes place
Running Module OK
Recoverable fault
• Configuration not OK e.g, P830
• Drive tripped
Bi-colour LED
Red
Green
▂█▂█▂█▂█▂█
Green
██████████
Red
Green
Bi-colour LED
Red
Green
▂█▂█▂█▂█▂█
Green
██████████
Red
AF-600FP BACnet
7
45