Viewing The Connection Panel - Samsung LE46A900G1F User Manual

Viewing the Connection Panel

1
Power Input
The product colour and shape may vary depending on the model.
➣
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
➣
When connecting an external device, match the colour of the connection terminal to the cable.
1 PC In [PC] / [auDIo]
- Connect to the video and audio output jack on your PC.
2 ComPonent In
- Connect component video cables to component connector ("P
corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and
connect the DTV (or DVD) to component connector ("P
- The P , P and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and
R B
Cr.
- Connect RCA audio cables to [R - AUDIO - L] on the rear of your set and the other ends to corresponding audio out
connectors on the DTV or DVD.
3 hDmI In 1, hDmI In , hDmI In 
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
- No additional Audio connection is needed for an HDMI to HDMI connection.
- When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
➣
What is HDMI?
- "High Definition Multimedia interface" allows the transmission of high definition digital video data and multiple channels of
digital audio.
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The
difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy
Protection) coding feature installed, and supports multi - channel digital audio.
➣
The TV may not output sound and pictures may be displayed with abnormal colour when DVD players/Cable Boxes/Satellite
receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no
sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the
back of the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite receiver to confirm
the HDMI version, then request a firmware update. HDMI cables that are not 1.3 may cause annoying flicker or no screen
display.
2 3
@ !
english - 
4 5
0
", "P ", "Y") on the rear of your set and the other ends to
R B
", "P ", "Y") on your set.
R B
[Side Panel Jacks]
6
3
7
8
9