Selecting the Sound mode
You can set the sound mode in the "tools" menu.
When you set to "Dual I-II", the current sound mode is displayed on the screen.
1. Press the toolS button on the remote control.
. Press the ▲ or ▼ button to select "Dual I-II".
. Press the ◄ or ► button to select required option.
. Press the enter
button.
Audio Type
Mono
A2
Stereo
Stereo
Dual
Mono
NICAM
Stereo
Stereo
Dual
➣
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
➣
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
➣
This function is only available in Analogue TV mode.
Connecting headphones (Sold separately)
You can connect a set of headphones to your set if you wish to watch a tV programme
without disturbing the other people in the room.
➣
When you insert the head set jack into the corresponding port, you can operate only "Auto
Volume" and "Sound Select"(in PIP mode) in Sound menu.
➣
Prolonged use of headphones at a high volume may damage your hearing.
➣
You will not receive sound from the speakers when you connect headphones to the system.
➣
The headphone volume and TV volume are adjusted differently.
Dual 1/2
MONO
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
english -
anynet+ (hDmI-CeC)
Picture mode
Sound mode
Sleep timer
SrS tS Xt
energy Saving
Dual l-ll
Default
Automatic
change
DUAL 1
Automatic
change
DUAL 1
tools
:
Standard
:
Custom
:
off
:
off
:
off
◄
Mono
►
move
adjust
e exit
TV Side Panel