Installing Batteries In The Remote Control - Samsung LE46A900G1F User Manual

Installing batteries in the remote Control

normal remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
. Install two AA size batteries.
➣
Make sure to match the "+" and "–" ends of the batteries with the diagram inside
the compartment.
. Replace the cover.
➣
Remove the batteries and store them in a cool, dry place if you won't be using the
remote control for a long time.
➣
Using the remote control with the
battery usage time.
mini remote Control
1. Press the left and right grooves of the remote control battery compartment cover
inwards at the same time.
➣
The remote control battery compartment cover will be projected outwards slightly.
. Pull the groove at the bottom of the remote control battery compartment cover forwards
to separate the cover.
. Insert the corresponding 3V(CR2450) Lithium battery.
. Put the battery cover in.
➣
If the remote control doesn't work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
(on/oFF) button set to On will reduce the
english -