Gt21 - Mitsubishi Electric GOT2000 Series Hardware User Manual

GT21

Input power supply 24 V DC/5 V DC
■For GT2107-W, GT2105
Item
Power supply voltage
Power Under the maximum
consumpti load
on
Backlight OFF
Inrush current
Permissible instantaneous power
failure time
Noise immunity
Withstand voltage
Insulation resistance
Applicable wire size
Applicable solderless terminal
Applicable tightening torque
(Terminal block terminal screw)
■For GT2104, GT2103
Item
Power supply voltage
Power Under the maximum
consumpti load
on
Backlight OFF
Inrush current
Permissible instantaneous power
failure time
Noise immunity
Withstand voltage
Insulation resistance
Applicable wire size
Applicable solderless terminal
Applicable tightening torque
(Terminal block terminal screw)
3 SPECIFICATIONS
114
3.3 Specifications of Power Supply Section
Specifications
GT2107-WTBD
GT2107-WTSD
24 V DC (+10%, -15%)
11.3 W or less
7.0 W
35 A or less
(3 ms, ambient temperature: 25 °C,
under the maximum load)
5 ms or less
Noise voltage: 1000 Vp-p, noise width: 1 μs, measured by a noise simulator with noise frequency ranging from 30 Hz
to 100 Hz
500 V AC for 1 minute across power terminals and earth
500 V DC across power terminals and earth, 10 MΩ or more by an insulation resistance tester
2
For power supply: 0.75 mm or more, For grounding: 2 mm
Solderless terminal for M3 screw RAV1.25-3, V2-N3A, FV2-N3A
0.5 N·m to 0.8 N·m
Specifications
GT2104- GT2104-
RTBD PMBD
24 V DC (+10%, -15%)
4.4 W or less 2.9 W or less
2.9 W 2.2 W
18 A or less (2 30 A or less (1 ms, ambient temperature: 25 °C, under the maximum load)
ms, ambient
temperature:
25 °C, under
the maximum
load)
5 ms or less
Noise voltage: 1000 Vp-p, noise width: 1 μs, measured by a noise simulator with noise frequency ranging from 30 Hz
to 100 Hz
500 V AC for 1 minute across power terminals and earth
500 V DC across power terminals and earth, 10 MΩ or more by an insulation resistance tester
Single wiring: solid wire 0.14 to 1.5 mm
2
stranded wire 0.14 to 1.0 mm (AWG26 to AWG16), or
rod terminal with an insulation sleeve 0.25 to 0.5 mm
Double wiring: solid wire 0.14 to 0.5 mm
2
stranded wire 0.14 to 0.2 mm (AWG26 to AWG24)
AI 0.25-6BU (AWG24), AI 0.34-6TQ (AWG22), AI 0.5-6WH (AWG20) (manufactured by PHOENIX CONTACT)
Swage: CRIMPFOX 6 (manufactured by PHOENIX CONTACT)
0.22 N·m to 0.25 N·m
GT2105-QTBDS
4.5 W or less
2.2 W
27 A or less (2 ms, ambient temperature: 25 °C, under the maximum load)
2
or more
GT2104- GT2103-
PMBDS PMBD
GT2104-
PMBDS2
2.2 W or less 2.6 W or less
1.5 W 2.0 W
2
(AWG26 to AWG16),
2
(AWG24 to AWG20)
2
(AWG26 to AWG20) or
GT2105-QMBDS
2.9 W or less
2.2 W
GT2103- GT2103-
PMBDS PMBDS2
1.9 W or less 2.2 W or less
1.3 W 1.6 W
GT2103-
PMBLS
GT2104-
PMBLS
5 V DC (+5%,
-5%)
Power from
the sequencer
1.1 W or less
0.7 W
—
—
—
—