GE AF-650 GP Operating Instructions Manual page 59

Class ID 0x2A AC/DC Drive Object
Attribute Access Rule
1 Get
2 Get
3 Get
4 Get/Set
6 Get/Set
7 Get
8 Get/Set
18 Get/Set
19 Get/Set
20 Get/Set
21 Get/Set
22 Get/Set
28 Get/Set
29 Get
Table 8.8: Instance Attributes
Value of Attribute 6
0
1
8
2
3
4
5
Table 8.9: Attribute 6 "Drive Mode"
NB!
Class ID 0x2A is only available if ODVA profile is selected in par. O-10 Control Word Profile.
Class ID 0xF5 Interface Object
Attribute Access Rule
1 Get
2 Get
3 Get/Set
4 Get
5 Get/Set
6 Get/Set
Table 8.10: Instance Attributes
58
Information about Data Type
Number of Attributes Supported USINT
List of Attributes Supported USINT
At Reference Boolean
Network Reference Boolean
Drive Mode USINT
Actual Speed INT
Reference Speed INT
Acceleration Time UINT
Deceleration time UINT
Low Speed Limit UINT
High Speed Limit UINT
Speed Scale SINT
Time Scale SINT
Ref From Net Boolean
ODVA Text
Vendor specific
Open loop speed ctr.
Closed loop speed ctr.
Torque Control
Process Control
Position Control
Name Data Type
Status DWORD
Configuration Capability DWORD
Configuration Control DWORD
Physical Link Object STRUCT of:
Path size UINT
Path Padded EPATH
Interface Configuration STRUCT of:
IP Address UDINT
Network Mask UDINT
Gateway Address UDINT
Name Server UDINT
Name Server 2 UDINT
Domain Name STRING
Host Name STRING
Contents
12
3,4,6,7,8,18,19,20,21,22,28,29
Bit 8 of Drive STW
value written to parameter "Net Reference"
Mapping of values from parameter H-40
See Attribute 22
See Attribute 22
Scaled with Attribute 28 and written to par. F-07
Scaled with Attribute 28 and written to par. F-08
Scaled with Attribute 22 and written to par. F-18
Scaled with Attribute 22 and written to par. F-17
Forms the "Speed Reference" and "Main Actual Value" for the
Drive together with Attribute 7 and 8
Scaling factor for all time attributes
value of parameter "Net Reference"
Value of par. H-40
Remaining values not listed below
0
1
NA
NA
NA
Description of Attribute
Interface status
Interface capability flags
Interface control flags
Path to physical link object
Size of Path
Logical segments identifying the physical link ob-
ject
TCP/IP network interface configuration.
The device's IP address.
The device's network mask.
Default gateway address
Primary name server
Secondary name server
Default domain name
Host name
OPCEIP EtherNet/IP
Drive Text
?
Speed open loop
Speed closed loop
NA
NA
NA
Parameter In
Drive
-
-
-
-
-
-
-
EN-01
EN-02
EN-03
EN-06 [0]
EN-06[1]
EN-07
EN-08