GE AF-650 GP Operating Instructions Manual page 43

EN-31 Net Reference
Option:
[0] * Off
[1] On
EN-32 Net Control
Option:
[0] * Off
[1] On
EN-33 CIP Revision
Option:
6
[0] Major version (00 - 99)
[1] Minor version (00 - 99)
EN-34 CIP Product Code
Range:
1100 [0 – 9999]
(AF-650 GP)
1110
(AF-650 GP)*
EN-37 COS Inhibit Timer
Range:
[0 – 65.535 ms]
EN-38 COS Filters
Range:
[[0 - 9] Filter 0 – 9 (0000 - FFFFhex)]
EN-80 FTP Server
Option:
[0] * Disable
[1] Enable
EN-81 HTTP Server
Option:
[0] * Disable
[1] Enable
EN-82 SMTP Service
Option:
[0] * Disable
[1] Enable
42
Function:
Read only. Displays the reference source in Instance 21/71.
Reference from the network is not active.
Reference from the network is active.
Function:
Read only. Displays the control source in Instance 21/71.
Control via the network is not active.
Control via the network is active
Function:
Read only. Displays the CIP-version of the option software.
Function:
Read only. Displays the CIP product code.
Function:
Read only Change-Of-State inhibit timer. If the option is configured for COS operation, this inhibit timer
can be configured in the Forward Open telegram to prevent that continuously changing PCD data gen-
erates extensive network traffic. The inhibit time is in milliseconds, 0 = disabled.
Function:
Change-Of-State PCD filters. Sets up a filter mask for each word of process data when operating in COS-
mode. Single bits in the PCD's can be filtered in/out.
Function:
Disables the built-in FTP server.
Enables the built-in FTP server.
Function:
Disables the build-in HTTP (web) server.
Enables the build-in HTTP (web) server.
Function:
Disables the SMTP (e-mail) service on the option.
Enables the SMTP (e-mail) service on the option.
OPCEIP EtherNet/IP