Setting Up The Audio Network - Yamaha MLC-200 Installation Manual

5. Setting up the audio network

Communications between the instructor and students as well as audio of the performance is sent and received through
the audio network. In the MLC200 Music Laboratory System, Dante has been adopted as the structure of the audio
network. Although software called Dante Controller is normally used to set up a Dante audio network, its high degree of
flexibility requires knowledge about audio networks.
Therefore, the dedicated software ML Config Tool is used in the MLC200 Music Laboratory System to make setup easier.
Download the ML Config Tool Software here:
5-1. Connect all MLA-200s to Ethernet switches.
The [STATUS] indicator flashes while the device is starting up. The indicator lights up when the device is finished
starting up.
Check that the [STATUS] indicator of all MLA-200s are lit.
Connection diagram showing 8 students.
12 – MLC-200 Installation Guide
Yamaha.io/MLCdownloads
Kramer to provide new diagram