Table of Contents
Advertisement
Information Functions
Information Register Functions
Info Register
Number
034
035
036
037
048
050
054
055
056
057
058
059
060
061
301
302
...
350
600
5.1.1
Meter Number (Register 000)
The meter displays the unique identity number personalised at the time of manufacture. The serial number
scrolls on the display from right to left. It must match the number printed on the meter‟s front panel label.
5.1.2
Instantaneous Power (Register 001)
The meter displays the power currently being consumed by the connected load (Display is in Watts). The Watts
icon flashes.
5.1.3
Current Credit Register (Register 002)
This register stores the remaining credit in the meter. This register has a minimum value of (minus) 99‟999.99
kWh, and a maximum value of 9‟999‟999.99 kWh.
Note: When more than seven digits are to be displayed (e.g. 1234567.8), the decimal digits are dropped.
Note: The remaining credit can be decremented past zero (0) into negative values if the load is not
disconnected. This negative credit value will be subtracted from any new credit entered into the meter.
Cashpower Gem Lite – User Guide
Review
Function / Meter Parameter
Changeable Option Register – Upper (Not used)
Changeable Option Register – Lower
Volatile Meter State Register – Upper
Volatile Meter State Register – Lower
Software Version Number
Power-fail Counter
Last Credit Token 20-Digit Transfer Number and ID in date/time format
Last Credit Token ID
Value of Credit for Last Credit Token entered
Key Revision and Key Type
Tariff Index
Current Credit Register (10 Wh resolution)
Supply Group Code Register
Total Units Counter (10 Wh resolution)
Last Token‟s 20-Digit Transfer Number and ID in Date/Time Format
2nd Last Token‟s 20-Digit Transfer Number and ID in Date/Time Format
...
50th Last Token‟s 20-Digit Transfer Number and ID in Date/Time Format
Enter Customer Information Mode (Refer to section 5.1.29)
21/27
© Landis+Gyr (Pty) Ltd
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Cashpower Gem Lite and is the answer not in the manual?
Questions and answers
how to stop the meter box from beeping when low on electricity
How do I check last day electricity kwk used
To check the last day's electricity usage in kWh on the Landis+Gyr Cashpower Gem Lite meter, follow these steps:
1. Enter information mode using the keypad.
2. Navigate to the appropriate register code for consumption history.
3. Check the consumption value for the last recorded day.
The meter tracks electricity usage in different registers, including current 30-day consumption (Register 008), which displays daily usage.
This answer is automatically generated
I pressed the code 008 to check last day electricity kwk used I don't understand the numbers it showed it was ! 7000004