Xrt And Deployment Package Installation Procedures On Ubuntu - Xilinx Alveo U200 Getting Started

XRT and Deployment Package Installation
Procedures on Ubuntu
Note: When installing XRT on Ubuntu, if the 2015 version of pyopencl is installed on your system, you
must uninstall it. The XRT installation will install the 2019 version of pyopencl and will return an error if
the 2015 version is installed. For more information, see
Use the following steps to download and install the XRT and deployment platform using a .deb
installation package.
For details on upgrading or downgrading the XRT and deployment package, see
Changing XRT and Target Platform
IMPORTANT! The installation packages referenced here are updated regularly and the file names frequently
change. If you copy and paste any commands from this user guide, be sure to update the placeholders in those
commands to match the downloaded packages.
IMPORTANT! Les packages d'installation référencés ici sont mis à jour régulièrement et les noms de fichier
changent fréquemment. Si vous copiez et collez des commandes de ce guide, veillez à mettre à jour les espaces
réservés dans ces commandes pour qu'ils correspondent aux packages téléchargés.
WICHTIG! Die hier genannten Installationspakete werden regelmäßig aktualisiert und die Dateinamen ändern
sich häufig. Wenn Sie Befehle aus diesem Benutzerhandbuch kopieren und einfügen, müssen Sie die Platzhalter
in diesen Befehlen entsprechend den heruntergeladenen Paketen aktualisieren.
1. Download both the XRT and deployment installation packages associated with your card
from the Getting Started tab in one of the following locations:
• Alveo U200 Product Page
• Alveo U250 Product Page
• Alveo U280 Product Page
2. Install the XRT installation package by running the following command from within the
directory where the installation packages reside. <version> is the latter part of the
installation package file name.
$ sudo apt install ./xrt_<version>.deb
This will install the XRT along with any necessary dependencies. Follow the instructions
when prompted throughout the installation.
3. Install the deployment installation packages required for the card:
$ sudo apt install ./xilinx-<card>-<version>.deb
UG1301 (v1.5) June 3, 2020
Getting Started with Alveo Accelerator Cards
Chapter 4: Installing the Deployment Software
Xilinx Answer Record
Versions.
73055.
Appendix A:
www.xilinx.com
Send Feedback
24