Dynamics Parameters - Yamaha DM2000 Owner's Manual

336
Appendix A: Parameter Lists

Dynamics Parameters

The dynamics effects for each channel strip include a Gate section (only for Input Chan-
nels) and a Comp section. The Gate section includes Gate and Ducking types. The Comp
section includes Compressor, Expander, Compander Hard (COMP. (H)), and Compander
Soft (COMP. (S)) types.
GATE Section (Only for Input Channels)
GATE
A gate attenuates signals below a set THRESHOLD level by a specified amount (RANGE).
THRESHOLD (dB) –54.0 to 0.0 (541 points)
RANGE (dB)
ATTACK (ms)
HOLD (ms)
DECAY (ms)
I/O Characteristics
THRESHOLD
Input Level
DM2000—Owner's Manual
Parameter Range
–70 to 0 (71 points)
0–120 (121 points)
44.1kHz: 0.02 ms – 2.13 sec
48kHz: 0.02 ms – 1.96 sec
88.2kHz: 0.01 ms – 1.06 sec
96kHz: 0.01 ms – 981 ms
(160 points)
44.1kHz: 6 ms – 46.0 sec
48kHz: 5 ms – 42.3 sec
88.2kHz: 3 ms – 23.0 sec
96kHz: 3 ms – 21.1 sec
(160 points)
Time Series Analysis
THRESHOLD
RANGE
This determines the level at which the gate effect
is applied.
This determines the amount of attenuation when
the gate closes.
This determines how fast the gate opens when the
signal exceeds the threshold level.
This determines how long the gate stays open
once the trigger signal has fallen below the thresh-
old.
This determines how fast the gate closes once the
hold time has expired. The value is expressed as
the duration required for the level to change by
6 dB.
Input Signal
RANGE
Time
Description
Output Signal
HOLD
ATTACK DECAY
Time