Inserting Mix Parameters Into Automix - Yamaha DM2000 Owner's Manual

Start the timecode source.
7
The AUTOMIX [REC] button indicator lights up continuously, and on the Automix Main
and Memory pages, the REC and PLAY buttons appear highlighted.
Adjust the faders and other controls as necessary.
8
Use the SELECTED CHANNEL section to edit the currently selected channel. Channels are
selected automatically when the [AUTO] buttons are pressed. You can punch channels out
of recording by using the [AUTO] buttons.
9 To stop Automix recording, stop the timecode source or press the STOP but-
ton on the Automix Main or Memory page.
When the Mix Update Confirmation preference is on (see page 277), a confirmation mes-
sage appears asking if you want to update the existing Automix data (i.e., keep the edits just
recorded).

Inserting Mix Parameters into Automix

You can insert the static mix parameter settings into the range specified by the IN and OUT
parameters in the current Automix data. This is useful when you want to quickly insert
static EQ settings into a specified range of the Automix data.
Event
Follow Steps 1–4 as described in the "Recording an Automix" section on the
1
previous page, then press the AUTOMIX [DISPLAY] button to display the
Automix Main page.
Before Insert
No event Event
Time
Inserting Mix Parameters into Automix
Event erased
Inserted
parameter value
IN
DM2000 Version 2—Owner's Manual
203
After Insert
Value prior to Insert
Time
OUT