Tools; Tool List; Recommended Tool List - Epson EB-E01 Service Manual

EB-E01 series

3.1.4 Tools

The following table indicates the tools recommended for use for disassembly,
reassembly and adjustment.

3.1.4.1 Tool List

Tool Name Qt.
Phillips screwdriver No. 00
1
(8 cm)
Phillips screwdriver No. 1
1
(10 cm)
Phillips screwdriver No. 2
1
(10 cm)
Hexagonal box screwdriver
1
(5 mm)
Flat-head precision screwdriver 1
Gloves 1
Anti-static wrist band 1
Tweezers 1
Polyimide tape q.s.*
Brush 1
Vacuum cleaner 1
Lens cleaner
q.s.*
(nonwoven cloth)
Lubricant* 2 q.s.*
Projection screen 1
Genuine power cable 1
Genuine remote controller 1
Insulation ohmmeter for
1
insulation resistance test
SEIKO EPSON
Disassembly and Assembly
Availability Application
Disassembling the Focus Ring

and the zoom ring.
Disassembling the outer cases

and inner components.
Disassembling the outer cases

and inner components.
Removing the computer

interface
Disassembling the Front Foot

Be sure to wear them when

handling circuit boards or
Optical Engine.

Securing cables.
Use commercially available

1
Polyimide tape generally called
"KAPTON ® TAPE".

Cleaning away dust.

Cleaning away dust.

1
Cleaning the projection lens.
Lubricating the shutter and its
1
frame.

To project images on.



Rating: 500 V/100 MW
Tool Name
Multi meter
Air compressor or hand blower
Host computer
PC cable
Video equipment
Audio and Video cables
(HDMI/Composite/USB, and
each audio)
Multi tester
RS-232C cable
USB memory or USB cable
IPS tool
CAT
Intra-mart
RESCUE
USB firmware for updater
EasyMP Network firmware for
updater
Microsoft .Net Framework 3.5
or later
USB COM Driver
*1: q.s.: Sufficient quantity
*2: Usable item = "Grease G-78 (AQUADRY W-0082)"

3.1.4.2 Recommended Tool List

Tool Name Qt.
Screwdriver magnetizer
66
INTERNAL USE ONLY
Qt. Availability Application

1 Ground continuity check
To remove dusts from optical

1
parts and air filter.

To output audio and video data
1
to the projector (To check the
component video input).

1
To control service tools

1
To output audio and video data
to the projector (To check the

1 each
HDMI input).
To measure resistance values

1
and voltages (AC/DC).

1 For writing DR data

1 For USB Updater.
1
1
1
1
See " 3.5.10 Service tool list
1
(p150)".
1
1
1
Availability Application
To prevent the screw from

1
falling into the projector
Revision A