Troubleshooting From The Device Names - Epson EB-E01 Service Manual

EB-E01 series

2.4 Troubleshooting from the Device Names

To display the device names, see
This section explains the troubleshooting mainly for the troubling parts identified using the error names and device codes displayed on the AS (after service) Menu
and the IPS tool to carry out their necessary repair. If a device code can be identified through the AS Menu or IPS tool, find the specific troubling part from the table
below.
When the troubling part can be identified, the blue-lettered parts with reference pages in the following table can be replaced in shorter ways than the ordinary
disassembling procedures.
COOLING SYSTEM COMPONENTS (FAN)
Error Name (Error Code)
Fan (FN)
(P.40)
COOLING SYSTEM/SWITCH COMPONENTS (SENSOR)
Error Name (Error Code)
Thermistor (SE)
(P.40)
Cover Open (LC)
SEIKO EPSON
" o Error Name/Warning Name/Device ID/Source Name List
P.58
Device Code
Device Name IPS tool
LV1 LV1 Fan
LMP LMP Fan
EX EX Fan
P.59
Device Code
Device Name IPS tool
LMP LMP TH
AIR AIR TH
--- ---
(SW Board)
Troubleshooting
CN
Name used in the manual
CN1602 INT Fan
CN1604 Lamp Fan
CN1603 EX Fan(P.140)
CN
Name used in the manual
CN1601 Lamp Thermistor(P.139)
CN1600 AIR thermistor
CN4
Lamp Switch
37
INTERNAL USE ONLY
(p179)".
Part Name
SPI Parts Name
FAN;SR7039-THT-H838
FAN,LAMP
FAN;TB6035-NMB-H838
Part Name
SPI Parts Name
PCB ASSY;H980TH-MP;PH
SWITCH,LID LAMP;PH;2
Revision A