Confirmation Method Which Connects Pc With Projector; Confirmation Method Using Ips Tool; Preparation - Epson EB-E01 Service Manual

EB-E01 series

4.1.2 Confirmation method using IPS tool

Even when a projector can't be projected, the error name can be checked by
connecting PC or using USB memory.

4.1.2.1 Preparation

1. Get the latest edition of the following tool from Tech Exchange.
Tool Name
IPS tool*1 Please install in PC beforehand.
V com Driver*2
Please install in PC beforehand.
(*1) The latest edition can be downloaded from TI No.AP14-0916-01 [1103].
The operating method details of IPS tool can be confirmed by TI No. "The
Operation Guide to use IPS-Tool".
(*2) The latest edition can be downloaded from Tech Exchange No. DR09-
0602-01. Please download the latest edition.
SEIKO EPSON
Appendix

4.1.2.2 Confirmation method which connects PC with projector

It's connected by a USB cable (Type-A-Type-B) and checked using IPS tool.
4.1.2.2.1 Confirmation method
1. Disconnect the power cord from the projector and check that all of the
2. Connect the power cord to the projector while pressing the [Enter] button
Remark
3. Connect the projector to the PC using USB cable.
4. Press the [Power] button on the projector or the remote controller.
5. Start IPS tool.
184
indicators on the projector are off.
on the Control Panel or remote controller. When the LED panel on the
projector flashes four times and then lights up, release the [Enter] button.
INTERNAL USE ONLY
Revision A