Toro 08753 Operator's Manual

Rear Broom
Sand Pro
Model No. 08753-Serial No. 260000001 and Up

Introduction

Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for more information, including
safety tips, training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure 2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
© 2018-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® /Infield Pro
Figure 1
Figure 1
Register at www.Toro.com.
® 3040 and 5040 Traction Unit
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Introduction ............................................................... 1
Safety ....................................................................... 2
Safety and Instructional Decals .......................... 2
Setup ........................................................................ 3
1 Assembling the Lift Arm/Attachment
Adapter to the Rear Broom.............................. 3
2 Mounting the Rear Broom to the Traction
Unit ................................................................. 4
3 Removing the Rear Broom from the
Traction Unit.................................................... 5
4 Adjusting the Link Assembly ............................ 5
Product Overview ..................................................... 6
Operation .................................................................. 7
Adjusting the Rear Broom Angle ......................... 7
Adjusting the Broom Head Angle ........................ 7
Setting the Transport Position............................. 8
g003440
Attachments/Accessories ................................... 8
Operating Tips .................................................... 9
Maintenance ........................................................... 10
Inspecting and Cleaning the Broom and
Traction Unit.................................................. 10
Greasing the Attachment Adapter..................... 10
Original Instructions (EN)
Form No. 3427-609 Rev A
Operator's Manual
Figure 2
Safety-alert symbol
All Rights Reserved *3427-609* A
Printed in Mexico
g000502