Advertisement
8.2.
ASSEMBLE THE SIDE WALL PANELS
8.2.1.
Place 2 x 9S and 9M the sheeting on your work table and join together with the self tapping screws per the diagram.
8.2.2.
Now fit 26K, 26J top channel and 26A, 26B bottom channel to the sheeting by tapping it in or sliding it in. Note that the small lip of the
channel is always facing out. This is to ensure that rain water can not build up inside your shed. Make sure 26K and 26J are used as top
side channels.
8.2.3.
Now fix 34R and 34L the mid wall channels to the sheeting by the self tapping screws. Please note that the groove should face
downwards. Fix other channels by the self tapping screws and enhance the strength by applying 66 the channel connectors.
© Jack Sealey Limited
Original Language Version
GSS2323G Issue: 1 - 28/08/14
Advertisement
