Advertisement
8.1.
ASSEMBLE THE REAR WALL PANELS
8.1.1.
Place 2 x 9S and 9M the sheeting on your work table and join together with the self tapping screws per the diagram.
8.1.2.
Now fit 26I, 26H top channel and 26C, 26D bottom channel to the sheeting by tapping it in (diagram A) or sliding it in.
(Diagram B) Note that the small lip of the channel is always facing out. This is to ensure that rain water can not build up inside your shed.
Make sure 26I and 26H are used as top side channels.
© Jack Sealey Limited
Original Language Version
GSS2323G Issue: 1 - 28/08/14
Advertisement
