Philips Beauty Influence HP4647 Manual page 9

- Always select a low heat setting when you start using the
straightener for the first time.
- For coarse, curly or hard-to-straighten hair, selected a medium
(120cC) to high heat setting (160cC).
- For fine, medium-textured or softy waved hair, select a medium
(120cC) to low heat setting (80cC)
- Take extra care with pale, blonde, bleached or colour-treated hair,
since it will be susceptible to damage at high temperatures.
The display (G) shows the selected temperature and the
remaining time of the straightening session.
- Look at the display to see the temperature you have selected.
- The bars on the display show the remaining usage time of the
straightener.The total usage time is 60 minutes. Every ten minutes
one of the six bars will disappear.
1 Insert the plug into the wall socket.
2 Press the on/off button.
The pilot light burns red to indicate that the straightener is heating up.
3 Let the appliance heat up.The default heat setting is 140cC.
Never leave the appliance unattended when it is plugged in.
Never put the appliance on a surface that is not heat-resistant when
it is heating up and when it is hot.
4 When the pilot light turns green the default temperature of
140cC has been reached.When the appliance has reached this
temperature, you can adjust the temperature to your preference
(fig. 2).
- Press the + button to increase the temperature or press the -
button to decrease the temperature.The display tells you which
temperature you have selected.The pilot light turns red to indicate
that the appliance is adjusting the temperature.
- The pilot light turns green when the selected temperature has been
reached.
5 Comb or brush your hair so that it is disentangled and smooth
(fig. 3).
ENGLISH
9