Huawei iBattery 3.0 Quick Manual page 4

Without a neutral wire
For cables with labels Hall+, Hall-, Hall_1, and Hall_2, connect the terminal labeled Hall+ to the
positive Hall effect sensor, connect the terminal labeled Hall- to the negative Hall effect sensor,
and connect the terminals labeled Hall_1 and Hall_2 to the corresponding ports on the iBOX
according to the cable connection sequence.
2.3
Installing the iBOX
UPS scenario
iBOX
iBOX
Cable Label
Battery1_HALL1
Battery2_HALL2
Battery3_HALL3
Battery4_HALL4
Cable Label
Battery1_HALL1
Battery1_HALL2
Battery2_HALL3
Battery2_HALL4
Battery3_HALL5
Battery3_HALL6
Battery4_HALL7
Battery4_HALL8
Install the iBOX on the corresponding BCB box.
1. Install the antenna delivered with the iBOX.
Ensure that the antenna is perpendicular to
the floor.
2. Attach the iBOX to the top or side of the BCB
box, and press the iBOX with your palm for
more than 10 seconds to ensure that the
fastener is attached firmly and evenly.
4
iBOX Port
HALL_1
HALL_2
HALL_3
HALL_4
iBOX Port
HALL_1
HALL_2
HALL_3
HALL_4
HALL_5
HALL_6
HALL_7
HALL_8