Table of Contents
Advertisement
Cabinet construction
Contents of this chapter
This chapter instructs in placing the modules and additional equipment into a cabinet.
For general instructions, see Drive modules cabinet design and construction instructions
(3AUA0000107668 [English]).
Limitation of liability
The installation must always be designed and made according to applicable local laws and
regulations. ABB does not assume any liability whatsoever for any installation which breaches
the local laws and/or other regulations. Furthermore, if the recommendations given by ABB
are not followed, the drive may experience problems that the warranty does not cover.
Installation of the brake control unit (BCU)
See BCU-02/12/22 control units hardware manual (3AUA0000113605 [English]) for the
mechanical installation of the brake control unit and chapter Electrical installation for the
electrical installation.
Installation examples
WARNING!
The code labels attached to mechanical parts such as busbars, shrouds
and sheet metal parts must be removed before installation as they may
cause bad electrical connections, or, after peeling off and collecting dust
in time, cause arcing or block the cooling air flow.
This section instructs in placing the modules and additional equipment into a user-defined
cabinet.
Cabinet construction 29
4
10
Advertisement
Table of Contents
