Advertisement
The Zones tab allows the operator to quickly
monitor and control all zone activity for this
location.
B
A
Test All Zones: Run all zones sequentially
for the specified number of minutes each. This
is handy for troubleshooting or simply reviewing
sprinkler performance.
Press the Play icon when ready to begin irrigation.
The Controllers tab allows the operator to add new
controllers or edit existing controllers.
B
Press the Play icon to
manually activate a specific
zone. Set the time to run and
press Start.
C
Press the Stop icon to
manually stop irrigation for a
specific zone.
D
information. It is possible to:
A
C
• change the zone description
D
• add an image for the zone
• specify if the zone uses a master valve and / or
• specify the Cycle and Soak times.
Click Save when done.
A
irrigation controller to the SMRT
or app. The SMRT
the following controllers:
• Toro EVOLUTION
• Irritrol Rain Dial
• Irritrol KD II
• Irritrol Total Control
• Irritrol Kwik Dial
• Toro TMC-424
• Toro TMC-212
• Irritrol MC-E
• Toro Custom Command
A
• Toro EVOLUTION Ag
B
the desired controller.
B
Manual Operation:
Manual Operation:
Edit Zone. Press the gear icon to edit zone
pump
Add Controller: Allows the operator to add an
website and app support
SCAPE
Edit Controller: Click the gear icon beneath
website and/
SCAPE
9
Advertisement
