Advertisement
3
Setting a Location
Add Location
After signing in, add the location of the SMRT Logic.
1. Click Add Location.
2. In the Add Location screen, enter the Location
Name and Description.
3. In the Search Address field, enter address and click
the Search icon.
It is possible to drag the red marker to the
exact location if necessary or desired.
2
4. It is possible to add a location image if
desired.
a) Click the Add
Location Image
icon.
b) Click Select Image.
c) Browse to the
desired image file
and click Open.
d) Click Select
Location Image.
5. It is possible to add a
SMRT Logic gateway.
a) In the Smart ID
field, enter the
9-digit Smart ID
found on the bottom of the gateway.
b) In the Security Key field, enter the 4-digit
security key found on the bottom of the
gateway.
6. Click Set Up Location. You will see a
confirmation message that the location was set
up successfully.
Adding the SMRT Logic Gateway
If, in the previous section, you forgot to add the
gateway, you can do that here:
1. Click the gear icon beneath the desired
location.
2. Click Add Gateway.
3. In the SMRTscape popup, enter the Smart ID
and Security Key found on the bottom of the
unit.
4. Click Add. The SMRT Logic gateway should be
added to the system.
Advertisement
