Huawei ACBox2000-21-D-A User Manual page 35

Table of Contents

ACBox2000-21-D-A

User Manual (Pan-Europe Edition)

Procedure

Step 1 Remove an appropriate length of the jacket and insulation layer from the AC input power

cable using a wire stripper.

Ensure that the jacket is in the waterproof connector.

Figure 5-10 Peeling a cable (three core wires)

(A) Core wire

Figure 5-11 Peeling a cable (four core wires)

Step 2 Insert each exposed core wire into the crimping area of an OT terminal and crimp them using

hydraulic pliers.

Step 3 Wrap the wire crimping area with heat shrink tubing or PVC insulation tape.

Issue 01 (2016-12-15)

One core wire should be connected to one OT terminal.

If heat shrink tubing is used, put it over the cable and then crimp the OT terminal. Blow the heat shrink

tubing using a heat gun until the tubing closely wraps the wire crimping area of the OT terminal. When

using the heat gun, protect devices from being scorched.

Huawei Proprietary and Confidential

(B) Insulation layer

5 Electrical Connections

Table of Contents