Siemens SINUMERIK 840D sl Series Diagnostics Manual page 612

Overview of Alarms
120305
Selection is not possible. The file %1 is currently being edited.
Parameters: %1 = Program name with path
Definitions: The file is currently open in another application (e.g. services) with an editor.
Reactions: - Alarm display.
Remedy: Change the program in the already open editor.
The alarm disappears automatically as soon as a program is edited or simulated in the
program area.
The alarm can also be acknowledged manually via diagnostics.
Program Con- Internal
tinuation:
120306
The selection is not possible. The file %1 is selected and active in channel %2.
Parameters: %1 = Program name with path
%2 = Channel number
Definitions: --
Reactions: - Alarm display.
Remedy: Stop the program with the NCU's channel reset and make the selection again.
The alarm disappears automatically as soon as a program is edited or simulated in the
program area.
The alarm can also be acknowledged manually via diagnostics.
Program Con- Internal
tinuation:
120307
The file %1 cannot be opened for the editor because it is selected in channel %2 for
execution from external sources.
Parameters: %1 = Program name with path
%2 = Channel number
Definitions: --
Reactions: - Alarm display.
Remedy: A different program on the NCU or for execution from external sources has to be selected.
The alarm disappears automatically as soon as a program is edited or simulated in the
program area.
The alarm can also be acknowledged manually via diagnostics.
Program Con- Internal
tinuation:
120308
In the event of an emergency stop, the program %1 can only be changed in the
machine/program correction area.
Parameters: %1 = Program name with path
Definitions: --
Reactions: - Alarm display.
Remedy: Switch to the machine area and change the program with the program correction function.
The alarm disappears automatically as soon as a program is edited or simulated in the
program area.
The alarm can also be acknowledged manually via diagnostics.
Program Con- Internal
tinuation:
120309
The selection is not possible. Please close the simulation and repeat the selection.
Definitions: The simulation is currently active in the program area.
A simultaneous editing is not possible.
2-612
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005