Epson WF-7620 Series Service Manual page 46

Epson WF-7620 / WF-7610 / WF-7110 Series
Panel Unit (WF-7110 Series)
Housing Upper Assy
Panel Unit
C.B.P-TITE SCREW 3x10 F/ZN-3C (6±1 kgf
Bottom
Remove the Panel Unit as follows.
1. Remove the screws (x3) that secure the Panel Unit.
2. Disengage the holes (x3) on the Panel Unit from the dowels (x3) on the Housing Upper Assy.
3. Press the hook A on the rear of the Panel Unit in the direction of the arrow to release the hook.
4. Release the hook B (x6) on the bottom of the Panel Unit, and disconnect the Panel FFC from the connector on the Panel Unit, then remove the Panel Unit.
Disassembly/Reassembly
Rear
·
cm)
Rear of Panel Unit
Hook A
Hook B
Dowel
and Hole
Detailed Disassembly/Reassembly Procedure for each Part/Unit
Revision B
46
Confidential