ABB Relion 650 Series Point List Manual page 19

1MRK 511 244-UUS A
IEC 61850 / Function block
name
ZCWSPSCH
ZCLCPLAL
ECPSCH
ECRWPSCH
Table 5: Basic IED functions
IEC 61850 / Function Function description
block name
Basic functions included in all products
INTERRSIG Self-supervision with internal event list
SELFSUPEVLST Self-supervision with internal event list
TIMESYNCHGEN Time synchronization
SNTP Time synchronization
DTSBEGIN Time synchronization
DTSEND Time synchronization
TIMEZONE Time synchronization
IRIG-B Time synchronization
SETGRPS Setting group handling
ACTVGRP Parameter setting groups
TESTMODE Test mode functionality
CHNGLCK Change lock function
ATHSTAT Authority status
ATHCHCK Authority check
TERMINALID IED identifiers
PRODINF Product information
PRIMVAL Primary system values
SMAI_20_1 - Signal Matrix for analog inputs
SMAI_20_12
3PHSUM Summation block 3 phase
GBASVAL Global base values for settings
DOSFRNT Denial of service, frame rate control for front port
DOSLAN1 Denial of service, frame rate control for LAN1 port
DOSSCKT Denial of service, socket flow control
DNP, 650 series
Point list manual
ANSI Function description
85 Current reversal and weak end infeed logic for distance protection
Local acceleration logic
85 Scheme communication logic for residual overcurrent protection
85 Current reversal and weak end infeed logic for residual overcurrent protection
© Copyright 2011 ABB. All rights reserved
Section 1
Introduction
13