Discarding The Battery; Internal Clock - GE Hydran 201i Instruction Manual

Hydran* 201i Instruction Manual
3.7.6

Discarding the Battery

3.8

Internal Clock

An internal real-time clock (RTC) circuit provides a calendar and a permanent clock,
unless the battery is disconnected. The clock uses a crystal oscillator as its time base; its
0.01 % accuracy (four minutes per month) is independent of the AC power supply
frequency.
Note: The calendar accounts automatically for leap years (366 days). However, it does not
include daylight saving functions.
The Hydran 201Ti's internal clock allows you to manage the following features:
• Historic data files (see Section 5.5.1).
• Delays of all alarm conditions (see Chapter 11 for details).
• Semimonthly, automatic sensor tests (see Section 5.5.4.2)
The H201Ti's date and time are set in the Date&Time submenu (see Section 5.5.5).
MA-033 Rev. 14.0, 12-Nov-18
Do not dissemble, crush, puncture or incinerate the battery.
Handle a damaged or leaking battery with extreme care. If
you touch the electrolyte, wash the exposed skin with soap
and water. If the electrolyte contacts your eye, flush the eye
with water for 15 minutes. If you have inhaled the electrolyte,
move to fresh air, and monitor breathing and circulation. In
each case, seek immediate medical attention.
discarding a battery, follow applicable safety procedures or
contact your local waste disposal provider regarding local
restrictions on the disposal or recycling of batteries.
This product contains a battery that cannot be disposed of
as unsorted municipal waste in the European Union. See the
product documentation for specific battery information. The
battery is marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling return the battery to your supplier or to
a designated collection point.
www.recyclethis.info
For more information see
When
Page 41