Advertisement
Quick Links
Single Monitor Extra Tall Desk Mount
Instruction Manual
SKU: STAND-V001T
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v001t
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Related Manuals for Vivo STAND-V001T
Summary of Contents for Vivo STAND-V001T
- Page 1 Single Monitor Extra Tall Desk Mount Instruction Manual SKU: STAND-V001T Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v001t GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Tools Needed
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 17.6lbs Failure to do so may result in serious injury. (7.98kg) Phillips Screwdriver ASSEMBLY STEPS STEP 1 OPTION A: “C” Clamp Installation Slide the cable management clip (G) and base cover (H) on to the bottom pole (B). Thread the bottom pole (B) onto the clamp (D). - Page 4 STEP 1 (continued) OPTION B: Existing Grommet Hole Installation Slide the cable management clip (G) and base cover (H) on to the bottom pole (B). Thread the bottom pole (B) onto the grommet base (E). Tighten the grub screws in the bottom of the grommet base (E), using the 3mm allen wrench (K).
- Page 5 STEP 3 Slide the arm (A) over the top of pole. Tighten using the 5mm allen wrench (L). STEP 4 Attach two bolts (M-A or M-B) and washers (M-C) to the top mounting holes of your monitor, making sure to leave 3mm of threads exposed. Align the bolts (M-A, M-B) in the VESA plate. 3m m M- C M- A...
- Page 6 STEP 4 (continued) Secure using two more bolts (M-A or M-B) and washers (M-C) in the bottom two holes. Tighten all four bolts using a phillips screwdriver. M- C M- A M- B STEP 5 Adjust the tension in the monitor bracket with 6mm allen key (M) as shown in diagram. +45 °...
- Page 7 STEP 6 Store the allen wrenches (M, L) in the cable management clip (G) for future adjustment. Adjust as desired.
- Page 8 - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V001T and is the answer not in the manual?
Questions and answers