Vivo STAND-V001O Instruction Manual
  1. Manuals
  2. Brands
  3. Vivo Manuals
  4. Racks & Stands
  5. STAND-V001O
  6. Instruction manual

Vivo STAND-V001O Instruction Manual

Pneumatic arm single monitor desk mount
Hide thumbs Also See for STAND-V001O:
Table of Contents

Advertisement

Quick Links

Download this manual
Pneumatic Arm Single Monitor Desk Mount
Instruction Manual
SKU: STAND-V001O
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v001o
help@vivo-us.com
www.vivo-us.com
309-278-5303

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STAND-V001O and is the answer not in the manual?

Questions and answers

Related Manuals for Vivo STAND-V001O

Summary of Contents for Vivo STAND-V001O

  • Page 1 Pneumatic Arm Single Monitor Desk Mount Instruction Manual SKU: STAND-V001O Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v001o help@vivo-us.com www.vivo-us.com 309-278-5303...
  • Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
  • Page 3 ASSEMBLY STEPS STEP 1 OPTION A: Clamp Installation Mount bracket (B) to bottom of gas spring arm (A) using bolts (E). Tighten using 4mm allen key (J). Attach clamp (C) to bracket (B) using bolts (D) and 4mm allen key (J). Mount according to thickness of desktop.
  • Page 4 STEP 1 (Continued) OPTION B: Grommet Base Installation For grommet hole mounting, place carriage bolt (H) through the center of grommet base (F). Mount grommet base to bottom of gas spring arm (A) using bolts (E). Tighten using 4mm allen key (J). Run carriage bolt (H) through grommet hole in desktop.
  • Page 5 STEP 2 Attach two bolts (M-A or M-B) and washers (M-C) to top mounting holes of monitor, making sure to leave 3mm of threads exposed. Align bolts (M-A, M-B) in VESA plate. Secure using two more bolts (M-A or M-B) and washers (M-C) in the bottom two holes. Tighten all four bolts using the phillips screwdriver end of 5mm allen key (K).
  • Page 6 STEP 4 Remove bottom plastic covers from gas spring arm (A) using the phillips screwdriver end of 5mm allen key (K). STEP 5 Run cables from monitor through bottom of gas spring arm (A). Reattach plastic covers as shown in diagram.
  • Page 7 Adjust as Desired 180° +90° 360° -45° 360° 360°...
  • Page 8 - 83% within < 2hr - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...

Table of Contents

Save PDF