Advertisement
Quick Links
Laptop Tray and Desk Mount
Instruction Manual
SKU: STAND-V001L
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v001l
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Related Manuals for Vivo STAND-V001L
Summary of Contents for Vivo STAND-V001L
- Page 1 Laptop Tray and Desk Mount Instruction Manual SKU: STAND-V001L Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v001l GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Tools Needed
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 22lbs Failure to do so may result in serious injury. (9.98kg) Phillips Wrench Screwdriver ASSEMBLY STEPS STEP 1 Option A: Desk Clamp Install Install the clamp brace (C) to the pole (A) using x3 M5x14 bolts (F). See Figure 1. Attach soft pad (T1) to the clamp brace (C) , see Figure 2. - Page 4 STEP 2 Install swivel arm (D) to the pole (A). Fasten the bolt with supplied Allen key (M). Attach the wire clip (L1, L2) to the pole (A) and swivel arm (D). STEP 3 OPTION A: Laptop Attach the VESA plate (E) to laptop tray (Q) with M4x10 bolts (R) and M4 nuts (S).
- Page 5 STEP 3 (Continued) OPTION B: Flat Back Monitor Attach the VESA plate (E) to the monitor with M4x12 thumb bolts (N). NOTE: Hand tighten screws to avoid over tightening. OPTION C: Curved Back Monitor Attach the VESA plate (E) to the monitor with M4x30 bolts (O) and M4 spacers (P). NOTE: Gently tighten with a screwdriver.
- Page 6 STEP 4 Slide the laptop tray/monitor onto the head of Install the security nut (H). Make sure the security swivel arm (D) as shown in the above diagram. nut is installed before you rotate the laptop tray/ monitor. STEP 5 Tighten the bolt with the supplied Allen wrench (M) to fix the tilt angle.
- Page 7 STEP 5 (continued) Use the supplied Allen key set (M) to make any necessary adjustments. STEP 6 Manage cables using wire clips (L1,L2) and store Allen keys (M) in wire clip (L1) for future use.
- Page 8 - 92% within < 3hr www.vivo-us.com AVG. RESOLUTION TIME : < 15 M (within office hrs) Chat live with an agent! 309-278-5303 AVG. RESOLUTION TIME : 5M 4S (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V001L and is the answer not in the manual?
Questions and answers