Table of Contents
Advertisement
Dismantling
Empty the fuel tank.
Clamp the clearing saw in fixture No 502 51 03-01.
Remove the cylinder casing and clean the cooling fins of
the cylinder as well as the area round the cylinder base.
Also clean the carburettor and spacer, making sure they
are free from metal filings and dirt.
Dismantle the following:
Starter, sparking plug cap sparking plug, air cleaner, fuel
hoe and carburettor.
Bend the ends of the securing plate aside and back off
the screws retaining the silence.r Note the two screws
securing the bottom of the silencer to the crankcase.
Remove the four screws securing the cylinder Use T-
type Allen key No 502 5018-01.
Carefully Oft the cylinder straight up.
Place a cloth in the crankcase opening to prevent dirt and
foreign objects from dropping into the crankcase Remove
the gudgeon pin retaining rings, using a pair of flat-nosed
pliers, and press the gudgeon pin out with a suitable pin
punch
Scrape the carbon deposits off the cylinder exhaust port and
combustion chamber
6:1
Hide quick links:
Advertisement
Table of Contents
