Husqvarna HUV4210 2005 Series Maintenance Service Manual page 17

Gasoline and electric vehicles 2005-2006
Table of Contents

Advertisement

SAFETY
ý
WARNING
• If wires are removed or replaced, make sure wiring and wire harness are properly routed and
secured. Failure to properly route and secure wiring could result in vehicle malfunction,
property damage, personal injury, or death.
• For vehicles with cargo beds, remove all cargo before raising the bed or servicing the vehicle.
If the vehicle is equipped with a prop rod, ensure that it is securely engaged while bed is
raised. Do not close bed until all persons are clear of cargo bed area. Keep hands clear of all
crush areas. Do not drop cargo bed; lower gently and keep entire body clear. Failure to heed
this warning could result in severe personal injury or death.
• Improper use of the vehicle or failure to properly maintain it could result in decreased vehicle
performance, severe personal injury, or death.
• Do not leave children unattended on vehicle.
DISCONNECT BATTERY CABLES
BEFORE WORKING ON VEHICLE
Figure 1-1 Gasoline Vehicle
2005-2006 HUV4210-G, 4210-E, 4210-GXP, 4210-EXP Maintenance and Service Manual
AS SEEN FROM
PASSENGER SIDE
OF VEHICLE
Place TOW/RUN switch in the TOW
Remove
FRONT OF
negative
VEHICLE
cable first.
Remove negative (–)
Place Tow / Run
switch in TOW
position before disconnecting or
connecting battery cables.
4
cable first.
Figure 1-2 Electric Vehicle
1
General Warning
1
2
3
Page 1-3

Advertisement

Table of Contents
loading

Table of Contents