Attachment Of The Odu; Connection Of The Coaxial Cable - NEC iPasolink 200 Manual

5-48
4 Mount the ODU on to the Bracket and tighten four bolts (M6) at upper and lower
parts of the ODU,
5 Connect the Coaxial cable to the RF IN/OUT connector of the ODU,
Band
Coaxial
cable
6 Install the Coaxial cables between the antenna and the ODU.
Notes
NWD-107460-02E
Submission Prohibited
NEC Internal Use Only

Attachment of the ODU

Hexagon socket head screw M6
Note
Top view
Example

Connection of the Coaxial Cable

1. Fix the Coaxial cable to the pole or member with Band (cable ties) after
antenna orientation has been completed.
2. Wrap the Coaxial cable connection points with a self-bonding tape for
waterproof. (The self-bonding tape shall be prepared by customer.)
Tightening torque is
4 N·m ±10%.
Right angle side
N-type connector
Antenna
Coaxial cable
ODU MOUNTING
Pole
ODU
Installation