NEC iPasolink 200 Manual page 152

9-2
For ODU (6-11 GHz)
ODU
Caution: Before connecting the IF cable between the IDU and ODU,
ODU
Self-bonding tape
ODU
6-38 GHz BAND ODU
IF cable
Note
NWD-107460-02E
Submission Prohibited
NEC Internal Use Only
IFL connector
using the circuit tester, check that the resistance of the I/F
cable between center conductor and insulation is more than
.
Ω
100 M
IF cable
Self-bonding tape
In case of L−angle
The self-bonding tape should be prepared by customer.
Fig. 9-1 Location of Connector for Waterproof (2/2)
WATERPROOF PROTECTION
For ODU (13-38 GHz)
(Bottom View)
This part should be wrapped the
self-bonding tape tightly, twice or
more around the IF cable
connector and IF IN/OUT
connector of the ODU for
waterproof.
ODU
Twice
Wrap twice the
IF IN/OUT
connector with
Self-bonding
tape
Stretch
A half of tape width
Installation