Table of Contents
Advertisement
10.ERROR DISPLAYS
If an error is displayed, follow the procedures shown below.
Error Code
E-02
Abnormal operation of internal measuring
E-03
system.
E-04
The angle is not measured properly.
The laser's positioning is not adjusted
E-05
properly.
Indicates excessive tilt of the laser instrument
E-72
during calibration checking or adjusting.
Abnormal operation of internal memory
E-99
system detected.
• If error code remains after trying countermeasures above, please contact your Topcon dealer.
Contents
49
Countermeasure
Switch OFF the power, then ON
again. Excessive vibration around the
laser may cause this error. Eliminate
vibration.
Contact your local dealer.
Switch OFF the power, then ON
again.
Switch OFF the power, then ON
again.
Set the instrument level then repeat
checking and adjusting calibration
procedure.
Switch OFF the power, then ON
again.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TP-L6 Series and is the answer not in the manual?
Questions and answers
If I lost the rc500 can I get a replacement and connect to my laser
The manual mentions that optional accessories, which may include the RC-500 remote control, are sold separately and may be subject to change or discontinuation without notice. It advises contacting a local dealer for details.
This answer is automatically generated