HP 16600A Series Installation Manual page 54

HP 16533/34A Calibration HP 16533/34A Calibration
HP 16533/34A Calibration HP 16533/34A Calibration
for HP 16600A Series/ HP 16700A/ HP 16702A
Single-Card Module
1
Power down the mainframe and
disconnect the power cable..
2
Remove the module from the
mainframe and set the
PROTECTED / UNPROTECTED
switch to UNPROTECTED.
If you calibrate this module without unprotecting the memory, the new calibration settings will
not be saved when the system is shut down. The system will default to the previous settings.
The new calibration settings would be effective for the current active session only.
16533p01
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
HP 16600A Series
16700A
Logic Analysis System
HP 16700A
16702A
LOGIC ANALYSIS SYSTEM
Insert Home Page
Up
Delete End Page
Down
INTENSITY
HP 16702A
53
Power
Busy
POWER
BUSY Power
Busy
UNPROTECTED
PROTECTED