NEC Univerge SV8100 Programming Manual page 678

Issue 10.1
Feature Cross Reference
None
2 - 642
Input Data
04
Signal Transmit Method
0 = Immediate
This is the default setting which does
not use Nagle Algorithm. When this is
enabled data packets are immediately
sent across the network with no
buffering delay.
1 = Buffering
Nagle Algorithm enabled. This means
that small data packets will not be
transmitted immediately across the
network. The smaller data packets will
be buffered and then sent across as
larger data packets therefore
decreasing the number of packets sent
across the network. When the number
of packets sent across the network
decreases, the amount of bandwidth
also decreases.
Conditions
None
UNIVERGE SV8100
0 = Immediate
1 = Buffering
Program 51 : NetLink Service
0
(Version
8.00 or
lower)
1
(Version
9.00 or
higher)