NEC Univerge SV8100 Programming Manual page 287

UNIVERGE SV8100
Item
No.
Programming Manual
Item
08
Toll Restriction Dial Block
Turns off or on an extension to use Dial
Block.
09
Hotline/Extension Ringdown
Turns off or on Ringdown Extension for
extensions with this COS.
10
Signal/Voice Call
Turns off or on an extension allowing it
to force Handsfree Answerback or
Forced Intercom Ringing for outgoing
Intercom calls.
11
Protect for the Call Mode Switching
from Caller
(Internal Call)
12
Department Group Step Calling
Turns off or on an extension to use
Department Group Step Calling.
13
ISDN CLIP
Determines if the ISDN calling line
identity presentation and screening
indicators are allowed.
14
Call Address Information
15
Block Outgoing Caller ID
Turns off or on the system ability to
automatically block outgoing Caller ID
information when a user places a call.
If this option is on, the system
automatically inserts the Caller ID block
code (defined in Program 14-01-21)
before the user-dialed digits.
16
Display E911 Dialed Extension Name
and Number
Turns off or on an extension to display
the name and number of the extension
that dialed E911.
17
ARS Override of Trunk Access Map
Turns off or on an extension ability to
override the trunk access map
programming for outgoing calls.
Default
Input Data
COS 01-15
0 = Off
0
1 = On
0 = Off
0
1 = On
0 = Off
1 = On
1
0 = Off
0
1 = On
0 = Off
1
1 = On
0 = Off
1 = On
1
0 = Off
0
1 = On
0 = Off
1 = On
0
0 = Off
1 = On
0
0 = Off
1 = On
0
Issue 10.1
Related
PRG
10-03-05
15-01-04
14-01-20
14-01-21
2 - 251