Advertisement
8.8.
INSTALL THE ROOF
8.8.1.
Self tapping screw fix the pre-assembled roof panel from 8.4.2; comprising items 3, 20A and 50.
8.8.2.
With the shed located centrally about the plinth slab, position the 6 anchor steel angles, M8 machine screw fix to internal compartment.
This will require "spotting" and drilling 8mm diameter holes through to shed panels. Spot through holes to plinth slab, remove anchor
angles and masonry drill slab for anchor bolts.
Please note anchor bolts and M8 machine screws are supplied, see "FITTINGS PACK".
8.8.3.
Insert anchor bolts, re-fit steel angles and anchor shed to plinth slab.
© Jack Sealey Limited
Original Language Version
GSS150819SDG Issue: 1 - 27/08/14
Advertisement
